Facts It Is Advisable To Have Knowledge Of Sa-3 Cylinder Shape Premium Tungsten Carbide Burr
SA-3 cylinder shape burrs are ideal for interior contour work and deburring. Due to extreme hardness with this tungsten carbide, technology-not only on a lot more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs tend to be suited for ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials such as stone, plastics, wood floor, and ceramic. Double cut burrs will leave a slightly smoother finish than single cut due to producing smaller chips while they cut away the pad. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and will see you through most applications.
Machines Used On:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are great for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined by the material you’re using your burr on. If you’re experiencing chipping, you are most probably operating at way too high of speed for that application. Start using a slower speed and increase as you go along before you get the greatest results
Apply light pressure and allow tool carry out the work. Bearing down on the tool will lead to reduced tool life plus a dull burr.
Always wear proper PPE to add (and not tied to) safety glasses, hearing protection, respirator, and work gloves. Keep all guards in place on the machine.
Avoid use on electricity drills; the slower speeds may result in chipping of your workpiece.
More information about SA-3 Carbide Burrs you can check this internet page