Details It Is Important To Have Knowledge Of SA-1 Carbide Burrs

SA-1 cylinder shape burrs are great for interior contour work and deburring. As a result of extreme hardness on this tungsten carbide, quite a few on much more demanding jobs than HSS (High-Speed Steel). These carbide burrs are constructed with tungsten carbide burr die grinder bits and definately will will soften at higher temperatures, so carbide is obviously the best option for long-term performance.

Double cut or Cross cut carbide burrs are generally used on ferrous and non-ferrous metals, soft steel, as well as all non-metal materials for example stone, plastics, hard wood, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut due to producing smaller chips because they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and can view you through most applications.

Cut – Double Cut
Max RPM – 70,000, however it is uncommon to require more than 35,000 RPM.

Machines Used On:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper

Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone

Cylinder Shape burrs are good for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed will be determined from the material you’re using your burr on. If you are experiencing chipping, you’re probably operating at too high of speed to the application. Start which has a slower speed while increasing in the process until you reach the the best results
Apply light pressure and allow the tool carry out the work. Bearing recorded on the tool will result in reduced tool life along with a dull burr.

Always wear proper PPE to add (and not restricted to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in position in your machine.
Avoid experience electrical energy drills; the slower speeds can lead to chipping of your workpiece.
For more information about SA-1 Carbide Burrs take a look at this site