Specifics You Have To Be Informed On SA-1 Carbide Burrs

SA-1 cylinder shape burrs are perfect for interior contour work and deburring. As a result of extreme hardness of this tungsten carbide, you can use it on much more demanding jobs than HSS (High-Speed Steel). These carbide burrs are constructed with tungsten carbide burr die grinder bits and can learn to soften at higher temperatures, so carbide is definitely the best option for long-term performance.

Double cut or Cross cut carbide burrs tend to be applied to ferrous and non-ferrous metals, soft steel, and for all non-metal materials for example stone, plastics, hard wood, and ceramic. Double cut burrs leaves a rather smoother finish than single cut as a result of producing smaller chips while they cut away the material. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is easily the most popular cut and definately will help you through most applications.

Cut – Double Cut
Max RPM – 70,000, however it is uncommon to require greater than 35,000 RPM.

Machines Utilized on:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper

Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone

Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed is determined from the material you’re using your burr on. If you are experiencing chipping, you are most likely operating at excessive of speed to the application. Start having a slower speed and increase as you go along unless you get the greatest results
Apply light pressure and allow the tool perform work. Bearing down on the tool will lead to reduced tool life along with a dull burr.

Always wear proper PPE to add (although not tied to) safety glasses, hearing protection, respirator, and work gloves. Keep all guards in place in your machine.
Avoid use on electrical power drills; the slower speeds can result in chipping of your respective workpiece.
Check out about SA-1 Carbide Burrs visit our webpage