Specifics It Is Important To Be Aware Of Sa-3 Cylinder Shape Premium Tungsten Carbide Burr

SA-3 cylinder shape burrs are great for interior contour work and deburring. Because of the extreme hardness of this tungsten carbide, quite a few on considerably more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs are generally used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials for example stone, plastics, wood, and ceramic. Double cut burrs leaves a somewhat smoother finish than single cut because of producing smaller chips since they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and may view you through most applications.

Machines Used On:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed is decided by the material you’re using your burr on. If you are experiencing chipping, you’re probably operating at excessive of speed for your application. Start having a slower speed while increasing on the way before you get the ideal results

Apply light pressure and allow the tool perform work. Bearing down on the tool will lead to reduced tool life as well as a dull burr.

Always wear proper PPE to incorporate (although not restricted to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards available in your machine.

Avoid use on electrical energy drills; the slower speeds may result in chipping of your workpiece.
More details about SA-3 Carbide Burrs check out our site