Traditional freestanding baths belong to several broad categories regarding their general shape, two other concerns of equal importance are the kind of foot and the type of tap fittings required. Each one of these and also the main types of traditional bath shape are described below. The info on this page is approximately contemporarily manufactured traditional style freestanding baths not antique baths.
Traditional bath feet usually are available in one among four broad styles although the variation within those styles can be great. Plain feet, ball and claw feet, often just called claw feet come in the form of a talon or claw gripping onto a ball which rests on to the ground and takes the body weight from the bath, lions paw feet are in the shape of the paw of the lion sitting on the bathroom floor there are also various more or less Art Deco style feet you could find over a few freestanding baths. Of the three categories the ball and claw feet appear in such wide variation that the more stylised versions are barely recognisable as such with most of the detail gone. Plain feet are similar to the ball and claw normally shape but haven’t any detail in it.
Bath feet can be found in various materials and finishes, cast iron feet have to be painted, usually they may be painted black, white or the same colour because bathroom walls. Feet are offered also created from brass, either using a polished brass finish (utilized with gold taps) or even in electroplated chrome, gold (usually called antique gold), brushed nickel or bright nickel. Not all traditional baths have feet. In general feet are certainly not interchangeable between baths although they may often be that specific manufacturers utilize same feet on two or more of the baths. You must never buy a bath with no feet unless you know already you can find the right feet manufactured to the bath.
Its imperative that you know when you buy a regular freestanding bath what kind of taps you will employ with it as well as what you will need to attractively plumb them in Traditional freestanding baths are usually called roll top baths, this refers back to the rolling side of many traditional design of bath. It is not easy to mount a tap to the rolling regarding a roll top bath. A normal strategy to this was to drill the taps hole inside the side of the bath just above the overflow the taps used are shaped ahead up at right angles for the water inlet so that they come in precisely the same form as being a deck mounted group of taps. These taps are called globe taps, they often be a pair of taps, cold and warm. Globe taps are just really used today with antique certain roll top baths.
More generally currently roll top baths onto which taps might be mounted have what’s called a tap platform. A tap platform is often a flattened part of the bath edge into which tap holes might be drilled and taps mounted. For baths onto which taps is not mounted you’ll employ either wall mounted or floor mounted taps. Note additionally that there are many contemporarily manufactured and, by and large, traditionally styled baths that don’t have a roll top as such and onto which taps could in principle be mounted anywhere about the fringe of the tub.