Traditional Freestanding Baths
Traditional freestanding baths fall under numerous broad categories regarding their general shape, two other difficulties of equal importance include the kind of foot along with the form of tap fittings required. These as well as the main types of traditional bath tub shape are described below. The info in this article is approximately contemporarily manufactured traditional style freestanding baths not antique baths.
Traditional bath feet usually can be found in one among four broad styles although variation within those styles may be great. Plain feet, ball and claw feet, often just called claw feet will be in are a talon or claw gripping onto a ball which rests on the floor and takes the load with the bath, lions paw feet are shaped like the paw of an lion looking at the restroom floor and there are also various pretty much Art Deco style feet that you could find over a few freestanding baths. Of those three categories the ball and claw feet are available in such wide variation that this more stylised versions are barely recognisable as a result with a lot of the detail gone. Plain feet are the same ball and claw generally speaking shape but have zero detail with them.
Bath feet can be bought in various materials and finishes, certain feet has to be painted, most often they may be painted black, white or same colour because the bathroom walls. Feet can also be found made from brass, either using a polished brass finish (which is used with gold taps) or perhaps electroplated chrome, gold (usually called antique gold), brushed nickel or bright nickel. Its not all traditional baths have feet. In general feet usually are not interchangeable between baths even though they may sometimes be that manufacturers utilize same feet on 2 or more of these baths. You must not get a bath minus the feet until you know you can get the correct feet manufactured with the bath.
Its important to know when you buy a traditional freestanding bath what sort of taps you will use with it along with what you simply must attractively plumb them in Traditional freestanding baths are usually called roll top baths, this refers to the rolling regarding many traditional style of bath. It is not possible to mount a tap onto the rolling fringe of a roll top bath. A regular means to fix this was to drill the taps hole in the side with the bath just over the overflow the taps used are shaped in the future up at right angles to the water inlet so they have been in exactly the same form as being a deck mounted group of taps. These taps these are known as globe taps, they usually be a set of taps, hot. Globe taps are simply really used currently with antique iron roll top baths.
More generally today roll top baths onto which taps may be mounted have what is called a tap platform. A tap platform is a flattened part of the bath edge into which tap holes can be drilled and taps mounted. For baths onto which taps can not be mounted you’ll employ either wall mounted or floor mounted taps. Note as well that there are several contemporarily manufactured and, broadly speaking, traditionally styled baths that don’t have a roll top as a result and onto which taps could in principle be mounted anywhere around the fringe of the tub.
More info about Freestanding Baths web site: click for more.